BORCAD Medical AVE PPA-AX30 Instruction Manual page 32

Birthing bed
Table of Contents

Advertisement

Lifting and unfolding
The surface of the completely pulled out foot section may be folded and lifted up
to the level of the seat. All listed positions of the foot section do not limit setting
of the birthing bed. Before loading the foot section its correct locking shall be
checked by short moves to the sides.
Unfolding upwards:
 Pull the control lever with the left hand
 Grab the front edge of the foot section with the right hand and pull upwards.
After releasing the control lever during lifting and folding the selected
position of the foot section will be arrested.
 With continuous pulling the upper horizontal position of bed is reached.
Folding down:
 Pull the control lever with the left hand (Pic.1) and simultaneously push
the back edge of the foot section with the right hand until the foot section
reaches low position (Pic.2).
 Before pushing the foot section in, under the seat, it must be in the
lowest position!
 In case of putting away the cushioning of foot section away from the
structure of the bed, it must be placed on its broadest laying surface
(ground, table) In case of laying the foot section with its setting on the
side edge, the cushioning may be damaged due to higher weight of the
part.
 When unfolding the foot section other person(s) shall not interfere.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
Pic. 1
Pic. 2
32
www.borcadmedical.com

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for BORCAD Medical AVE PPA-AX30

This manual is also suitable for:

Ave ppa-bx30Ave ppa-cx30Ave ppa-ax36

Table of Contents