Exchangeability Of Mattresses / Upholstery Of Birth Bed Bearing Surfaces - BORCAD Medical AVE PPA-AX30 Instruction Manual

2.4.15 Exchangeability of mattresses / upholstery of birth bed bearing surfaces

Incompatible mattresses / upholstery can cause danger. The birth bed is
fitted with replaceable upholstery. In case of damage to upholstery (e.g.
mechanical or physical-chemical damage), it is necessary to exchange the
upholstery for a perfect one in order to maintain the birth bed hygienic
compatibility and overall safety. In other cases, the manufacturer recommends
replacing the upholstery of bearing surfaces after 5 years of use. Date of
upholstery manufacture can be found on the reverse side of the back and
underfoot part.
10-2012
When changing the bed, always make sure that the upholstery fits
correctly to the seat section of the bed. Spaces filled with fabric do not
fulfil their function. Silicone pins of the upholstery do not hold and there
is a risk of injury of the labouring woman or damage to the plastic parts of
the mattress.
In case of ordering special design of the existing mattress, the back and
seat sections can be equipped with openable zippers to allow better
access to the PUR foam (PPA-370).
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 611, fax: +420 558 668 087
44
www.borcadmedical.com