Adjusting The Leg Rests - BORCAD Medical AVE2 Instruction Manual

7.6 Adjusting the leg rests

The load capacity of one leg rest is 70 kg maximum (154 lb.).
The load capacity of foot section and leg rests together is 170 kg maximum (374 lb.).
Always brake the footrests plates before transport! This means to set up the lowest height level and
turn them in a way that their edges do not overlap the edges of the footrests.
Manipulation with the foot section or seating section and with the leg rests can cause a collision,
especially when the leg rests are situated close to the foot section or above it.
Motoric movement of the seat section requires proper visual control of the leg rests position.
Therefore, be cautious when adjusting the particular positions.
Undetachable leg rests may be used as feet support (Foot rest position), in the
Gynecologic position and in the Horizontal position to maximize the bed surface.
Basic overview
Folding/unfolding of
the leg rest tray
Turning the leg
Tilting of the leg rest
height adjustment
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
Leg rest tray
rest sideways
Leg rest tray
Warning:
Caution
44
www.borcadmedical.com