Changing The Rear Light Bulb - APRILIA RSV MILLE - 2002 Manual

CHANGING THE REAR LIGHT
BULB
Carefully read p. 102 (BULBS).
NOTE
The rear light houses two parking
light/stoplight bulbs (1).
The following operations refer to a single
bulb, but are valid for both.
Before changing a bulb, check the efficien-
cy of the stoplight switches, see p. 98
(CHECKING THE SWITCHES).
106
use and maintenance RSV mille
1
◆
Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Unscrew and remove the two screws (2).
◆
Remove the protection screen (3).
NOTE
tion the protection screen in its seat.
Tighten the screw (2) carefully, without
exerting too much pressure, in order to
avoid damaging the protection screen.
◆
Press the bulb (1) slightly and rotate it
anticlockwise.
◆
Extract the bulb (1) from its seat.
! !
- RSV mille R
1 3
Upon reassembly, correctly posi-
2
Insert the bulb in the bulb socket,
making the two bulb pins coincide with
the relevant guides on the socket.
◆
Correctly install a new bulb of the same
type.