Mechanical Mounting; Connectors And Pinouts; Pinouts For Ipos80X0 Bx-Can - Technosoft iPOS80x0 BX-CAN Technical Reference

3.2

Mechanical Mounting

The iPOS80x0 BX drive is intended to be mounted horizontally on a metallic support using the provided mounting holes
and the recommended mating connectors, as specified in chapter 3.3.2 Mating Connectors for CAN and CAT.
The metallic support must act as a cooling heat sink.
For thermal calculations, use the graphs below. Power Losses @10A applies to iPOS8010 and Power Losses @20A
applies to iPOS8020.
3.3

Connectors and Pinouts

3.3.1

Pinouts for iPOS80x0 BX-CAN

 Technosoft 2019
13 iPOS80x0 BX-CAN/-CAT Technical Reference