Table of Contents
Advertisement
If you Need Assistance ...
If you want to ...
Visit Technosoft online
Receive general information
or assistance (see Note)
Ask questions about product
operation or report suspected
problems (see Note)
Make suggestions about,
or report errors in documentation.
1
Safety information
Read carefully the information presented in this chapter before carrying out the drive installation and setup! It
is imperative to implement the safety instructions listed hereunder.
This information is intended to protect you, the drive and the accompanying equipment during the product operation.
Incorrect handling of the drive can lead to personal injury or material damage.
The following safety symbols are used in this manual:
WARNING!
CAUTION!
1.1
Warnings
WARNING!
WARNING!
WARNING!
WARNING!
Technosoft 2019
Contact Technosoft at ...
World Wide Web:
World Wide Web:
Email:
Fax: (41) 32 732 55 04
Email:
Mail: Technosoft SA
SIGNALS A DANGER TO THE OPERATOR WHICH MIGHT CAUSE BODILY
INJURY. MAY INCLUDE INSTRUCTIONS TO PREVENT THIS SITUATION
SIGNALS A DANGER FOR THE DRIVE WHICH MIGHT DAMAGE THE PRODUCT
OR OTHER EQUIPMENT. MAY INCLUDE INSTRUCTIONS TO AVOID THIS
SITUATION
THE VOLTAGE USED IN THE DRIVE MIGHT CAUSE ELECTRICAL SHOCKS. DO
NOT TOUCH LIVE PARTS WHILE THE POWER SUPPLIES ARE ON
TO AVOID ELECTRIC ARCING AND HAZARDS,
DISCONNECT WIRES FROM THE DRIVE WHILE THE POWER SUPPLIES ARE ON
THE DRIVE MAY HAVE HOT SURFACES DURING OPERATION.
DURING DRIVE OPERATION, THE CONTROLLED MOTOR WILL MOVE. KEEP
AWAY FROM ALL MOVING PARTS TO AVOID INJURY
6
http://www.technosoftmotion.com/
http://www.technosoftmotion.com/
contact@technosoftmotion.com
hotline@technosoftmotion.com
Avenue des Alpes 20
CH-2000 Neuchatel, NE
Switzerland
iPOS80x0 BX-CAN/-CAT Technical Reference
NEVER CONNECT /
Advertisement
Table of Contents
