Hard Drive - HP ZBook Fury 17 G7 Maintenance And Service Manual

7. Remove the carrier (3).
Reverse this procedure to install solid-state drives 3 and 4 and the solid-state drive carrier.

Hard drive

To remove the hard drive, use these procedures and illustrations.
Table 5-4 Hard drive, hard drive bracket and hard drive cable descriptions and part numbers
Description
NOTE: The hard drive spare part kit does not include the hard drive bracket or hard drive cable. The hard drive bracket is included in the
Hard Drive Harware Kit, spare part number M20091-001. The hard drive cable is included in the Cable Kit, spare part number
M20105-001.
2 TB, SATA, 5400 RPM, 7.0 mm
1 TB, SATA, 7200 RPM, 9.5 mm
500 GB, SATA, 7200 RPM, 9.5 mm
500 GB, SATA, 7200 RPM, 9.5 mm, FIPS
Before removing the hard drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the service cover
3. Remove the battery (see
4. Remove the solid-state drive carrier (see
Remove the hard drive:
44 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
(Preparation for disassembly on page
(Service cover on page 40).
Battery on page 41).
Solid-state drives 3 and 4 on page
Spare part number
912487-850
766644-001
703267-001
820572-001
66).
42).
ENWW