Wlan Module - HP ZBook Fury 17 G7 Maintenance And Service Manual

Reverse this procedure to reassemble the hard drive.

WLAN module

To remove the WLAN module, use this procedure and illustration.
Table 5-5 WLAN module descriptions and part numbers
Description
Intel Wi-Fi 6 AX201 ax 2×2 + Bluetooth 5.0 MU-MIMO M.2 2230 non-vPro MIPI+BRI WW with 2 antennas
Intel Wi-Fi 6 AX201 ax 2×2 + Bluetooth 5.0 MU-MIMO M.2 2230 vPro 160MHz MIPI + BRI WW with 2 antennas
IMPORTANT:
authorized for use in the computer by the governmental agency that regulates wireless devices in your country
or region. If you replace the module and then receive a warning message, remove the module to restore device
functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the service cover
3. Remove the battery (see
Remove the WLAN module:
1. Carefully disconnect the two antenna cables (1) from the module.
46 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
To prevent an unresponsive system, replace the wireless module only with a wireless module
(Service cover on page
Battery on page
(Preparation for disassembly on page
40).
41).
Spare part number
L57250-001
L57248-001
66).
ENWW