Table of Contents
Advertisement
7.
Remove the nine Phillips M2.5 × 6.0 screws (1) that secure the display assembly to the computer.
8.
Swing the top edge of the display assembly (1) away from the top cover. (The top cover disengages from
the display assembly hinges.)
9.
Separate the display assembly (2) from the top cover.
Reverse this procedure to replace the display assembly.
Beam connector
To remove the beam connector, use this procedure and illustration.
ENWW
Component replacement procedures
85
- Quick Links:
- Solid-State Drives 3 and 4
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
