3.
Remove the cover (3) by sliding it forward and then lifting it up.
Thermal pads service memory modules 1 and 3 and are located on the memory module compartment
cover. These pads should be inspected each time that the cover is removed. These pads are intended to be
reused if they are not damaged. If these pads are damaged and any residue remains on the memory
modules (1) or the cover (2), it should be thoroughly removed and replaced. If protective releasing paper is
attached to the thermal pads, it should be removed prior to replacement.
60
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
ENWW