Solid-State Drive 1 - HP ZBook Fury 17 G7 Maintenance And Service Manual

2. Press down on the module until the side retention clips snap into place (3).

Solid-state drive 1

To remove solid-state drive 1, use this procedure and illustration.
Table 5-11 Solid-state drive description and part number
Description
1 TB, M.2 2280, PCIe, NVMe-3×4, SS with TLC
512 GB, M.2 2280, PCIe-3×4, SS with TLC
512 GB, M.2 2280, PCIe, NVMe, SED with TLC
256 GB, M.2 2280, PCIe-3×4, SS with TLC
256 GB, M.2 2280, PCIe, NVMe, SED with TLC
Before removing solid-state drive 1, follow these steps:
1. Prepare the computer for disassembly
2. Remove the service cover
3. Remove the battery (see
4. Remove the keyboard (see
Remove solid-state drive 1:
1. Remove the Phillips M2.0 × 2.9 screw (1) that secures the solid-state drive 1 cover to the computer.
2. Lift the right side (2) of the cover until it rests at an angle.
62 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
(Preparation for disassembly on page
(Service cover on page 40).
Battery on page 41).
Keyboard on page 54).
Spare part number
L85348-001
L85360-001
L85368-002
L85350-001
M07245-001
66).
ENWW