Siemens SINUMERIK 802S Diagnostics Manual page 40

1 Alarms
12 540
Explanation
Response
Remedy
Program continua-
tion by
12 550
Explanation
Response
Remedy
Program continua-
tion by
12 560
Explanation
Response
Remedy
Program continua-
tion by
12 600
Explanation
Response
Remedy
1-40
Channel %1 block %2 is too long or too complex
%1 = Channel number
%2 = Block number, label
The max. block length may not exceed 128 characters.
Alarm display.
Interface signals are set.
Split the program block into several partial blocks.
Press NC START to clear the alarm and continue program execution.
Channel %1 block %2 identifier %3 not defined or option does not exist
%1 = Channel number
%2 = Block number, label
%3 = Source string
The displayed identifier is not defined in the control system.
Alarm display.
Interface signals are set.
Press NC STOP and check the machine data file in the NC program or check
the faulty block.
- Correct the name used (type error)
- Check the options.
Press NC START to restart the program or re-import the machine data file.
Channel %1 block %2 programmed value %3 exceeds allowed limits
%1 = Channel number
%2 = Block number, label
%3 = Source string
The programmed numerical value is out of the allowed limits.
Alarm display.
Interface signals are set.
Adhere to the value range.
Press NC START to clear the alarm and continue program execution.
Channel %1 block %2 invalid Checksum of Line
%1 = Channel number
%2 = Block number
When executing an INI or TEA file, an invalid line check sum has been de-
tected.
Alarm display.
Interface signals are set.
Interpreter stop.
NC Start inhibited.
Correct the INI file or correct the MD and create a new INI file (via 'upload').
6FC5598-3AA20-0BP2 © Siemens AG 2002 All Rights Reserved
SINUMERIK 802S/802C (DG)
01.02