Lcd - Digi ConnectPort LTS Series User Manual

Configure the device using the ConnectPort LTS web interface
Primary/Secondary authentication server: The IP address or DNS name of the remote
n
authentication server.
Authentication server socket: The TCP port number of the authentication server.
n
Primary/Secondary account server: The IP address or DNS name of the remote accounting
n
server. The accounting server is only required when you set the authentication method to
RADIUS.
Account server socket: The TCP port number of the accounting server.
n
Shared secret: A password string used for encryption of messages between the authentication
n
server and the ConnectPort LTS. Only RADIUS servers require a shared secret.
Timeout: The authentication timeout, in seconds. Only RADIUS servers require a timeout value.
n
Retries: The authentication retry count. Only RADIUS servers require an authentication retry
n
count.
LDAP search base: The LDAP search base string. Only LDAP servers require a search base
n
string.
Domain name for active directory: The LDAP domain name string for Active Directory. Only
n
LDAP servers require a domain name of Active Directory.
Secure LDAP: Allows you to enable Secure LDAP for LDAP servers. The default is Disable. Only
n
LDAP servers require this option.
Note Default permissions for authenticated remote users are defined under the user name
ruser.

LCD

Use the LCD configuration page to configure the LCD display for ConnectPort LTS. The following
settings are available on LCD configuration page:
Enable display: When enabled, LCD display is enabled and you can use LCD menu using
n
keypad.
Background image wait time: Specifies how much user idle time must elapse before the
l
background image is launched on the LCD display. The default is 0 and means the
background image will not be launched automatically.
Use default background image: When enabled, the default background image appears on the
n
LCD display when either the wait time is elapsed or the Exit menu is selected using keypad on
the LCD display.
Load background image: Upload a background image on the LCD. This product supports only
n
128 x 64 8 bit bitmap image. If you upload an incorrect image type, an error message appears
on LCD screen. After uploading the image, toggle the Enable display or Use default
background image option once to force the LCD daemon to reload the image.
Load custom (Python) program: Upload a custom Python program onto the ConnectPort LTS.
n
Digi ConnectPort LTS User Guide
Peripheral
98