Sd Memory; Usb; Modem - Digi ConnectPort LTS Series User Manual

Configure the device using the ConnectPort LTS web interface

SD Memory

The ConnectPort LTS supports standard SD and SDHC (high-capacity) memory cards. To use an SD
memory device, insert the card in the SD slot and then select Start service on the SD Memory page.
After you start the SD memory card service, you can see the card information such as:
Card Type
n
File system
n
Used size
n
Available size
n
If the SD memory card is not formatted, select the format type and click the Format button.
The physical mounting point of SD memory device on the ConnectPort LTS is /mnt/sd.

USB

To use the USB device, insert the device in the USB port and then select Start service next to the USB
device you want to start on the USB page.
The ConnectPort LTS W version has two USB ports. After you start the USB service, you can see the
device information such as:
Card Type
n
File system
n
Used size
n
If the USB storage device using is not formatted, select the format type and click the Format button.
The physical mounting point of USB device on the ConnectPort LTS is /mnt/usb1 or /mnt/usb2.

Modem

Use the Modem page to configure the internal modem for ConnectPort LTS. The Modem page has the
same configuration settings of Modem Profile of Serial port settings and it allows you to establish or
receive connections from other systems and internal modems. Modem configuration page allows you
to use the several connection types.
Modem Settings
The Modem profile allows you to connect a modem to the serial port. When you assign the Modem
profile to a serial port, the following settings appear under Modem Settings on the Port Profile
Settings page:
Incoming Connection: Modem receives dial-in connections, such as inbound PPP connections
n
or to manage a device through a telephone network. The ConnectPort LTS product server will
receive connections from other hosts.
Outgoing Connection: The modem sends dial-out connections to establish connections with
n
external hosts or to connect to an external PPP network.
Network Bridge Connection (bi-directional): You can use the modem to establish
n
connections to other hosts and receive connections from other hosts.
Digi ConnectPort LTS User Guide
Peripheral
90