Reboot; Enable/Disable Access To Network Services - Digi ConnectPort LTS Series User Manual

Configure the device using the ConnectPort LTS web interface
module.

Reboot

Changes to some device settings require saving the changes and rebooting the ConnectPort LTS. Use
the Reboot page to reboot the ConnectPort LTS. To reboot a ConnectPort LTS from the web interface:
1. Select Administration > Reboot.
2. Click the Reboot button. Wait approximately one minute for the reboot to complete.

Enable/disable access to network services

You can enable and disable access to various network services, such as ADDP, RealPort, SNMP, SSH,
and telnet. For example, you can disable access to all network services that are not required for
running or interfacing with the ConnectPort LTS product for performance and security reasons. From
the web interface, you can enable and disable network services on the Network Services Settings
page for a ConnectPort LTS product. See
Digi ConnectPort LTS User Guide
Basic Network Services Settings.
Administration
130