Using The Rc.user File; Quick Reference For Configuring Features - Digi ConnectPort LTS Series User Manual

Get started with ConnectPort LTS products

Using the rc.user file

The /usr2/rc.user file is a text file on the ConnectPort LTS that is accessible by logging in as the root
user. You can modify the file to automatically perform various tasks at boot time, such as:
Run advanced linux commands
n
Initiate custom scripts
n
Load additional configuration information
n
The Digi Knowledge Base contains additional information on the rc.user file, common examples, and
advice on how to test and implement commands using the rc.user file. Go to
http://www.digi.com/support

Quick reference for configuring features

The following table provides a quick reference for configuring features and performing device tasks.
Some features are configurable from the command line interface only. For those features, the
commands that configure the feature are noted. See the ConnectPort LTS Command Reference for
descriptions of the commands.
To learn how to access the web interface, see
Feature/task
Administration/Configuration management:
Certificate Management
File management: uploading
and downloading files, such
as applet files, and custom
splash screens
Python program file
management
Backup/restore
configuration settings
Update firmware
Reset configuration to
factory defaults
System information,
including device identifiers
and statistics
Reboot the device
Alarms
Connection management:
Digi ConnectPort LTS User Guide
for details.
Sign in to the web
Path to feature in the web interface
Administration > Certificate Management
Administration > File Management
Administration > File Management
Administration > Backup/Restore
Administration > Update Firmware
Administration > Factory Default Settings
Administration > System Information
Administration > Reboot
Configuration > Alarms
Using the rc.user file
interface.
24