Set Socket_Tunnel; Set Switches; Set Sysauth; Set Syslog - Digi ConnectPort LTS Series User Manual

Configure and manage the device using the ConnectPort LTS
command line interface
Authentication failure
n
Cold start
n
Link up
n
Login traps
n
The set snmp command also displays current SNMP settings.

set socket_tunnel

Use the set socket_tunnel command to configure the socket tunnel.

set switches

Use the set switches command to configure the MEI type and termination.

set sysauth

Use the set sysauth command to enable authentication for the web interface and command-line
interface.

set syslog

Use the set syslog command to configure the system log.

set system

Use the set system command to configure the system identifying information.

set tcpserial

Use the set tcpserial command to configure serial TCP.

set trace

Use the set trace command to configure the trace log.

set udpserial

Use the set udpserial command to configure the serial UDP.

set user

Use the set user command to configure a user.

set web

Use the set web command to configure the web timeout value in minutes.

set xbee

Use the set xbee command to configure the XBee.
Digi ConnectPort LTS User Guide
Management through the command line
interface
139