Paper Curls - Brother HL-L8250CDN Service Manual

4.2.7

Paper curls

< User Check >
- Check if the size of paper specified from the driver is matched with the one actually loaded.
- Select "Reduce Paper Curl" in the driver.
- Check if the paper is loaded into each paper tray correctly.
- Print with the envelope lever is lowered.
Step
1
2
4.2.8 Unable to perform 2-sided printing
< User Check >
- Firmly close the back cover.
- Firmly set the paper tray.
- Set the driver setting to 2-sided printing.
- Use the paper equal to or larger than Letter size or A4 size.
(Use paper specified in each country setting.)
Step
1
2
3
4
5
6
Cause
Fuser unit failure
Main PCB failure
Cause
Eject actuator coming off
Back cover failure
Eject sensor failure
Paper eject origin sensor failure
Paper eject ASSY failure
Main PCB failure
Replace the fuser unit.
Replace the main PCB ASSY.
Re-assemble the eject actuator.
Replace the back cover.
Replace the eject sensor PCB ASSY.
Replace the paper eject origin sensor.
Replace the paper eject ASSY.
Replace the main PCB ASSY.
2-83
Remedy
Remedy
Confidential