Brother HL-L8250CDN Service Manual page 354

(18) Remove the two Taptite pan B M4x14 screws to remove the Fuser unit from the Main body.
Note:
- Do not apply a physical impact or vibration to the Fuser unit.
- Do not touch the roller and electrodes as shown in the figure below to prevent breakage
of the Fuser unit.
Fuser unit
Taptite pan B M4x14
Fig. 7-15
Fig. 7-16
7-10
Main body
Taptite pan B M4x14
Fuser unit
<Back side>
Confidential