Brother HL-L8250CDN Service Manual page 84

■
Error code 7200
Jam MP Tray
Remove the jammed paper from Multi Purpose Tray and press Go.
When the paper is fed from the MP tray, after the MP registration front sensor detects paper
pass, the registration rear sensor does not detect paper pass after a set period of time.
< User Check >
- Remove the jammed paper.
- Insert the papers straight using the paper guide of the MP tray.
- Check if the papers loaded in the MP tray is not held down with your hand.
- Check if the double feed occurs in the MP tray.
- Check if the front cover is closed correctly.
- Check if the machine is used with the MP tray support and MP flap are in closed state.
Step
1 Foreign object at the back of the
machine
2 Registration rear actuator that
has come off or that has been
caught
3 Connection failure of the
registration front/rear sensor
PCB harness
4 MP unit installation failure
5 MP separation pad worn out
6 Registration rear sensor failure
7 Paper feed related gear
damaged
8 Main PCB failure
Cause
2-61
Remedy
Remove the foreign object.
Re-assemble the registration rear
actuator.
Reconnect the registration front/rear
sensor PCB harness.
Re-assemble the MP unit.
Replace the PF kit MP.
Replace the registration front/rear sensor
PCB.
Replace the main drive unit.
Replace the main PCB ASSY.
Confidential