Brother HL-L8250CDN Service Manual page 217

9.26 Fuser Fan
(1) Disconnect the Connector (CN4) from the High-voltage power supply PCB ASSY.
High-voltage power supply PCB ASSY
CN4
<Right side>
(2) Slightly rotate the Fuser fan in the direction of the arrow 2a and pull it out from the Main
body.
Label
Fuser fan
<Right side>
Assembling Note:
When assembling the Fuser fan, be sure to assemble it in a way that the label side
faces out.
Harness routing: Refer to
Fig. 3-97
2a
2b
Fig. 3-98
" Fuser Fan, Power Fan"
3-80
Fuser fan
Main body
Hook
Confidential