Brother HL-L8250CDN Service Manual page 372

(4) Slide the Roller holder ASSY in the direction of the arrow and remove it from the T1 drive
shaft gear Z17M07.
(5) Slide the Roller holder ASSY in the direction of the arrow 5a and 5b in this order and
remove it from the Paper feed unit.
4
T1 drive shaft gear Z17M07
Assembling Note:
Align the Hole of the Paper feed unit to the Shaft of the Roller holder ASSY and insert it
into the hole.
Paper feed unit
Roller holder ASSY
(6) After replacing the PF kit 1, reset the counter.
(Refer to "1.3.29 Reset counters for parts (Function code 88)" in Chapter
Paper feed unit
5a
5b
Roller holder ASSY
Fig. 7-45
Shaft
Hole
Fig. 7-46
7-28
Paper feed unit
5.)
Confidential