Brother HL-L8250CDN Service Manual page 236

(3) Pull out the MP drive shaft and remove the MP registration front actuator from the MP
upper cover ASSY.
MP registration front actuator
(4) Release the wiring of the MP paper empty/registration front sensor PCB ASSY.
(5) Remove the Taptite bind B M3x8 screw and remove the MP paper empty/registration front
sensor PCB ASSY from the MP upper cover ASSY.
MP paper empty/
registration front
sensor PCB ASSY
Harness routing: Refer to
3b
MP upper cover ASSY
Fig. 3-131
Fig. 3-132
" MP Paper Empty/Registration Front Sensor PCB ASSY"
3a
Taptite bind B M3x8
MP upper cover ASSY
3-99
MP drive shaft
Confidential