Brother HL-L8250CDN Service Manual page 237

9.37 Paper Feed Unit/Joint Pin
(1) Push the T1 lift arm to the back and remove "B" of the Roller holder ASSY from "A" of the
T1 lift arm.
(2) Slide the Roller holder ASSY in the direction of the arrow and remove it from the T1 drive
shaft gear Z17M07.
(3) Slide the Roller holder ASSY in the direction of the arrow 3a and 3b in this order and
remove it from the Paper feed unit.
T1 drive shaft gear Z17M07
<Front side>
Fig. 3-133
2
Roller holder ASSY
Fig. 3-134
3-100
Roller holder ASSY
T1 lift arm
"B"
Paper feed unit
3a
3b
"A"
Confidential