Brother HL-L8250CDN Service Manual page 315

■
Printing of misregistration correction chart
<Operating procedure>
Model without touch panel
(1) Press the
"MAINTENANCE 66" on the LCD in the
initial state of the maintenance mode.
Then, press the OK key.
"REGISTRATION" is displayed on the
LCD.
(2) Press the
"PRINT CHART" on the LCD.
(3) Press the Go key. "PRINTING" is
displayed on the LCD, and
misregistration correction chart (see the
figure below) is printed. When printing
is finished, "PRINT CHART" is
displayed on the LCD.
(4) Press the Cancel key to return the
machine to the initial state of the
maintenance mode.
■
Misregistration correction chart
or key to display
or key to display
Fig. 5-10
5-32
Model with touch panel
(1) Press the 6 key twice in the initial state
of the maintenance mode.
"REGISTRATION" is displayed on the
LCD.
(2) Press the or
"PRINT CHART" on the LCD.
(3) Press the SET key. "PRINTING" is
displayed on the LCD, and
misregistration correction chart (see the
figure below) is printed. When printing
is finished, "PRINT CHART" is
displayed on the LCD.
(4) Press the X key to return the machine
to the initial state of the maintenance
mode.
key to display
Confidential