Brother HL-L8250CDN Service Manual page 228

(9) Disconnect the Connector (CN101) of the LVPS-main harness ASSY from the
Low-voltage power supply PCB unit.
CN101
Low-voltage power supply PCB unit
(10) Remove the five Taptite cup S M3x6 SR screws and remove the Low-voltage power
supply PCB unit from the LVPS plate.
Taptite cup S M3x6 SR
Harness routing: Refer to
Fig. 3-115
Low-voltage power supply PCB unit
LVPS plate
Fig. 3-116
" Low-voltage Power Supply PCB Unit"
3-91
Connector of the
LVPS-main harness ASSY
Taptite cup S M3x6 SR
Confidential