Brother HL-L8250CDN Service Manual page 221

Assembling Note:
After assembling the Eject ground wire 1 and Eject ground wire 2, check the
conduction between the Middle roller shaft and the Cooling roller shaft.
Paper eject ASSY
(3) Release the wiring of the Paper eject origin sensor.
(4) Release the two Hooks and remove the Paper eject origin sensor from the Paper eject
ASSY.
Hook
Paper eject origin sensor
Harness routing: Refer to
Cooling roller shaft
Fig. 3-104
Hook
Hook
Paper eject origin sensor
Fig. 3-105
" Paper Eject ASSY"
3-84
Middle roller ASSY
Middle roller shaft
Hook
Paper eject ASSY
Eject cooling
roller ASSY
Confidential