Brother HL-L8250CDN Service Manual page 88

■
Error code 8A01
Size Error DX
Specify the correct paper and press Go.
The registration rear sensor detected that the fed paper was larger or smaller than the
specified size in 2-sided printing.
Error code 8A02
2-sided Disabled
Load #S paper and press Go.
The registration rear sensor detected that the length of the paper is too long and it may hit
within the machine in 2-sided printing.
< User Check >
- Use the Letter to Legal size paper.
Step
1 Registration rear actuator
caught on some position
2 Registration rear sensor failure
3 Main PCB failure
■
Error code 8D01
Short paper
Open the Back Cover and then press Go.
The registration rear sensor detected that the paper loaded in the paper tray was smaller than
the specified size.
< User Check >
- Open the back cover and print using the straight paper path.
- Length of the paper is 114 mm or more.
Step
1 Registration rear actuator
caught on some position
2 Registration rear sensor failure
3 Main PCB failure
Cause
Cause
2-65
Remedy
Re-assemble the registration rear
actuator.
Replace the registration front/rear sensor
PCB ASSY.
Replace the main PCB ASSY.
Remedy
Re-assemble the registration rear
actuator.
Replace the registration front/rear sensor
PCB ASSY.
Replace the main PCB ASSY.
Confidential