Brother HL-L8250CDN Service Manual page 54

Error Message
Upper line
Drum ! -
Drum Stop Replace the Drum
Unit.
Ignore Data Ignore Data
Press Stop[x].
Jam 2-sided -
Jam Inside -
Jam MP Tray -
-
Jam Rear
-
Jam Tray 1
Jam Tray 2 -
Limit Cancel printing.
Exceeded
Middle line
Electric discharge that may be
caused by dirt on the corona wire
of the drum unit was detected.
Electric discharge was detected
when the number of the drum unit
rotations had become more than
twice of the upper limit.
Undecodable data is found
during printing.
Undecodable PS data is
received.
After the first side is printed in
2-sided printing mode, the
registration front sensor does not
detect paper pass after a set
period of time.
After the registration rear sensor
detects paper pass, the eject
sensor does not detect paper
pass.
When the paper is fed from the
MP tray, after the MP registration
front sensor detects paper pass,
the registration rear sensor does
not detect paper pass after a set
period of time.
After the registration rear sensor
detects the end of paper pass
and the specified period of time
has passed, the eject sensor
continues to detect paper pass.
In the case of printing by feeding
paper from the paper tray 1, after
the T1 paper feed sensor detects
paper pass, the registration front
sensor does not detect paper
pass after a set period of time.
In the case of printing by feeding
paper from the T2 paper tray unit,
after the T2 paper feed sensor
detects paper pass, the
registration front sensor does not
detect paper pass after a set
period of time.
The maximum number of pages
that can be printed is exceeded.
2-31
Error
State
Codes
6A00
6B01
7700
7000
7200
7100
7300
7400
Refer
to:
2-59
2-58
--- 4.11.1
--- 4.11.1
2-63
2-59
2-61
2-60
2-62
2-62
--- 4.11.1
Confidential