Brother HL-L8250CDN Service Manual page 15

Laser safety (For 110-120V Models Only)

This equipment is certified as a Class 1 laser product as defined in IEC60825-1:2007
specifications under the U.S. Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the Radiation Control for Health and Safety Act of 1968.
This means that the equipment does not produce hazardous laser radiation.
Since radiation emitted inside the equipment is completely confined within protective housings
and external covers, the laser beam cannot escape from the product during any phase of user
operation.
FDA regulations (For 110-120V Models Only)

U.S. Food and Drug Administration (FDA) has implemented regulations for laser products
manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in
the United States. One of the following labels on the back of the product indicates compliance
with the FDA regulations and must be attached to laser products marketed in the United
States.
Manufactured:
BROTHER TECHNOLOGY (SHENZHEN) LTD.
No.6 Gold Garden Ind. Nanling, Nanwan, Longgang, Shenzhen, China
This product complies with FDA performance standards for laser products except for
deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
WARNING
Use of controls, adjustments or performance of procedures other than those specified in
this manual may result in hazardous invisible radiation exposure.
Internal laser radiation
Max. Radiation Power: 25 mW
Wave Length: 770 - 800 nm
Laser Class: Class 3B
For use in the USA or Canada only

These products are made for use in the USA and Canada only. We cannot recommend using
them overseas because the power requirements of your product may not be compatible with
the power available in foreign countries. Using USA or Canada models overseas is at your
own risk and may void your warranty.
v
Confidential