Brother HL-L8250CDN Service Manual page 290

(4) Press the OK key. The following is
displayed on the LCD.
Selector 1
(5) Pressing the
the key to enter "0". Press the key of
the value you want to enter at selector
No.1. The underline cursor moves to
the next digit.
(6) Enter each value at selectors No.2 to
No.8 in the way described in step (5)
using the
(7) Press the OK key. This operation saves
the newly entered selector values onto
the EEPROM and readies the machine
for accepting a worker switch number
(WSW00).
(8) When worker switch setting is
completed, press the Cancel key to
return the machine to the initial state of
the maintenance mode.
[2] Printout of worker switch (WSW) data (Function code 11)
<Function>
This function is used to print out the setting items and the details set by the worker switches.
<Operating procedure>
Model without touch panel
(1) Press the
"MAINTENANCE 11" on the LCD in the
initial state of the maintenance mode.
Then, press the OK key.
(2) "PRINTING" is displayed on the LCD
and the CONFIGURATION LIST (see
the figure below) is printed.
(3) When printing is finished, the machine
returns to the initial state of the
maintenance mode.
Selector 8
key to enter "1" and
and keys.
or key to display
Fig. 5-2
5-7
(3) Move the cursor to the selector you
want to change with the
and change the value by pressing the 1
or 0 key.
(4) When you finish changing the value,
press the SET key. This operation
saves the newly entered selector
values onto the EEPROM and readies
the machine for accepting a worker
switch number (WSW00).
(5) When worker switch setting is
completed, press the X key to return
the machine to the initial state of the
maintenance mode.
Model with touch panel
(1) Press the 1 key twice in the initial state
of the maintenance mode.
(2) "PRINTING" is displayed on the LCD
and the CONFIGURATION LIST (see
the figure below) is printed.
(3) When printing is finished, the machine
returns to the initial state of the
maintenance mode.
or key,
Confidential