Advertisement

Quick Links

Product Safety Guide
Read this guide before attempting to operate the product, or before attempting any maintenance.
Failure to follow these instructions may result in an increased risk of personal injury or damage to
property, including through fire, electrical shock, burns, or suffocation. Brother shall not be liable for
damage caused where the product owner has failed to follow the instructions set out in this guide.
Read all of the instructions. Save them for later reference.
Symbols and
Conventions Used in
the Documentation
The following symbols and conventions are
used throughout the documentation.
Follow all warnings and instructions marked
on the product.
WARNING
WARNING indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injuries.
CAUTION
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injuries.
IMPORTANT
IMPORTANT indicates a potentially
hazardous situation which, if not avoided,
may result in damage to property or loss of
product functionality.
NOTE
NOTE specifies the operating environment,
conditions for installation, or special
conditions of use.
HL-L8260CDW / HL-L8360CDW / HL-L8360CDWT / HL-L9310CDW /
MFC-L8610CDW / MFC-L8900CDW / MFC-L8895CDW /
NOTE
• Not all models are available in all countries.
• The illustrations in this guide show the
MFC-L8905CDW / MFC-L9570CDW
Electrical Hazard icons alert you to
possible electrical shock.
Fire Hazard icons alert you to the
possibility of a fire.
Hot Surface icons warn you not to
touch product parts that are hot.
Prohibition icons indicate actions
that must not be performed.
Bold
Bold typeface identifies specific
keys on the product's control
panel or on the computer
screen.
Italics
Italicized style emphasizes an
important point or refers you to
a related topic.
Courier
Text in Courier New font
New
identifies messages on the LCD
of the product.
HL-L8360CDW/HL-L9310CDW/
MFC-L8900CDW.
1

Advertisement

Table of Contents
loading

Summary of Contents for Brother MFC-L8895CDW

  • Page 1 Failure to follow these instructions may result in an increased risk of personal injury or damage to property, including through fire, electrical shock, burns, or suffocation. Brother shall not be liable for damage caused where the product owner has failed to follow the instructions set out in this guide.
  • Page 2: Compilation And Publication Notice

    The contents of all manuals and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.
  • Page 3 DO NOT place the product near chemicals or in a place where chemicals could be spilled on it. Should chemicals come into contact with the product, there may be a risk of fire or electrical shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover, or deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or electrical shock.
  • Page 4 Doing so may interfere with the operation of the product, causing print quality problems. • DO NOT place your product next to sources of interference, such as speakers or the base units of non-Brother cordless telephones. Doing so may interfere with the operation of the product's electronic components. Connect the Product Safely...
  • Page 5: Electrical Hazards

    DO NOT dismantle this product. Dismantling this product could cause a fire or electrical shock. DO NOT attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage points and other risks and may void your warranty. Refer all servicing to a Brother Authorized Service Center.
  • Page 6 If water, other liquids, or metal objects get inside the product, immediately unplug the product from the AC power outlet and contact Brother Authorized Service Personnel. This product should be connected to an AC power source within the range indicated on the rating label (You can find the rating label on your machine).
  • Page 7: Fire Hazards

    FIRE HAZARDS Failure to follow the warnings in this section may create the risk of a fire. DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire. Instead, use only a dry, lint-free cloth.
  • Page 8: Hot Surface

    If the product becomes unusually hot, releases smoke, generates any strong smells, or if you accidentally spill any liquid on it, immediately unplug the product from the AC power outlet. Contact Brother Authorized Service Personnel. Plastic bags are used in the packing of this product. Plastic bags are not toys. To avoid the danger of suffocation, keep these bags away from babies and children, and dispose of them properly.
  • Page 9 Installation must be performed properly according to the user's guide. • Brother strongly recommends that you DO NOT use any type of extension cord. • This product should be positioned so that nothing pinches or constricts the power cord.
  • Page 10 If you use a Lower Tray, DO NOT carry the product with the Lower Tray, as you may be injured or cause damage to the product because it is not attached to the Lower Tray. (Products with scanning function only) To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.
  • Page 11 Should you come into contact with toner, follow these instructions: • Inhalation Obtain immediate medical attention. In case of accidental inhalation, move to fresh air immediately, then obtain medical attention. • Skin contact Remove contaminated clothing immediately and wash affected skin with plenty of water or soap and water.
  • Page 12: Important Safety Instructions

    2. Save these instructions for later reference. 3. Follow all warnings and instructions marked on the product. 4. Unplug this product from the AC power outlet and refer all servicing to Brother Authorized Service Personnel under the following conditions: • If liquid has been spilled into the product.
  • Page 13 (MFC models only) To reduce the risk of fire, electrical shock, and injury to people; • Use only a No. 26 AWG or larger telecommunication line cord. Disconnect device This product must be installed near an AC power outlet that is easily accessible. In case of an emergency, you must unplug the power cord from the AC power outlet to shut off the power completely.
  • Page 14 To program this information into your machine, see the Quick Setup Guide: Set the date and time and Set the Station ID. If you are not able to solve a problem with your product, contact Brother Customer Service (see the Online User's Guide: Brother Numbers).
  • Page 15: Federal Communications Commission (Fcc) Declaration Of Conformity (Usa Only)

    IMPORTANT • Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s authority to operate the equipment. • A shielded interface cable should be used to ensure compliance with the limits for a Class B...
  • Page 16 RF Exposure Notice (USA or Canada Only) (Wireless Models Only) This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from a person's body.
  • Page 17 FDA regulations and must be attached to laser products marketed in the United States. Manufactured: BROTHER TECHNOLOGY (SHENZHEN) LTD. No.6 Gold Garden Ind. Nanling, Nanwan, Longgang, Shenzhen, China This product complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No.
  • Page 18 ENERGY STAR specifications for energy efficiency. Trademarks BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Active Directory is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries.
  • Page 19: Open Source Licensing Remarks

    Open Source Licensing Remarks This product includes open-source software. Go to the manual download selection of your model’s home page of Brother Solutions Center at support.brother.com to view the Open Source Licensing Remarks and Copyright Information. Copyright and License ©2017 Brother Industries, Ltd.
  • Page 20 The listing below is intended to be a guide rather than a complete listing of every possible prohibition. In case of doubt, we suggest that you consult with the appropriate authority or advisor with regard to the specific document. The following documents issued by the United States/Canadian Government or any of its Agencies, States, Territories, or Provinces may not be copied.
  • Page 21 These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will support only machines purchased in their own countries. Made from 100% recycled paper Month of publication: 11/2020   D01V0X001-00 USA/CAN Version C...

Table of Contents