HAKO Citymaster 650 Operating Manual page 95

Operation
1 Calculation of the minimum front ballast for rear attachments
Enter the value in the table.
2 Calculation of the minimum rear ballast for front attachments
(Value "x" see manufacturer's data, if no information x = 0.45)
Enter the value in the table.
3 Calculation of the actual front axle load T
V tat
If the required minimum front ballast (G V min ) is not reached, with the front
attachment (G V ), the weight of the front attachment must be increased to
the weight of the minimum front ballast!
Enter the calculated actual front axle load and the permissible front axle
load stated in the operating manual of the work machine in the table.
4 Calculation of the actual total weight
(If the required minimum rear ballast (G H min ) is not reached with the rear
attachment (G H ), the weight of the rear attachment must be increased to
the weight of the minimum rear ballast!)
Enter the calculated actual total weight and the permissible total weight
stated in the operating manual of the work machine in the table.
5 Calculation of the actual rear axle load
Enter the calculated actual rear axle load and the permissible rear axle
load stated in the operating manual of the work machine in the table.
6 Tyre load capacity
Enter double the value (two tyres) of the permissible tyre load capacity
(see for example documents of the tyre manufacturer) in the table.
95
03-147015-00-00.fm