2.4.5
Connections for rear attachments
Note
The hydraulic couplings are marked with coloured rings and
engraving, see example Fig. 72-C.
The following devices can be operated with the connections for the rear
attachments Fig. 72-19:
•
A = X64 socket for additional functions of control cable
•
E = Supply 19/22/27 l/min (hydraulic circuit II)
•
C = Supply for lift system hydraulic cylinder
•
C = Return for lift system hydraulic cylinder
•
E = Return 19/22/27 l/min (hydraulic circuit II)
•
F = X65 7-pin socket for lighting
•
C = X68 7-pin socket for spreader control cable
•
C = X67 7-pin socket for spreader control cable
Switching on the hydraulic circuit
Select the A menu in the multifunction display with the turn-push knob
Fig. 71-69. Change the current value in the hydraulic circuit II menu item
Fig. 72-X. Setting range: ON/OFF
Required for attachments without coding plug! The hydraulic circuit is
switched off if the driver leaves the driver's seat.
19
A
B
C
Fig. 72:
02-147015-00-00.fm
D
E
F
X
H
69
Fig. 71:
G
Use
77