HAKO Citymaster 650 Operating Manual page 48

Use
A
2 sec
Fig. 33:
48
Example: Driving profile setting
The following example explains how to make a setting in the driving and
sweeping program.
1. In the normal view (A), push the turn-push knob Fig. 33-69 for at least
two seconds. The operating menu is activated. The cursor stands on
the EXIT symbol (B).
2. In the operating menu turn the turn-push knob and move to the arrow
symbol (C).
3. In the operating menu push the turn-push knob. The configuration
menu is activated. The cursor stands on the EXIT symbol (D).
4. In the configuration menu turn the turn-push knob and move to the driv-
ing profile menu item (E).
5. In the configuration menu push the turn-push knob. The driving profile
sub-menu is selected. The cursor stands on the EXIT symbol (F).
6. Turn the turn-push knob in the driving profile sub-menu. There are the
following possibilities:
• Loading a sweeping program with the symbol (G)
• Resetting to defaults with the symbol (H)
• Saving the current parameters with the symbol (I)
• Selecting the storage place for loading or saving: 1 to 6 (J)
Use the EXIT symbol to exit the submenu.
B
69
C
F G
D
E
H I
1 ... 6
02-147015-00-00.fm
J