Operation; Checklist - Before Start-Up Of The Snow Clearing System - HAKO Citymaster 650 Operating Manual

6.4.4

Operation

Checklist – Before start-up of the snow clearing system
No. Description
1 Checking the suction mouth lift system
2 Checking the front tool carrier
3 Switching winter operation on
4 Adjusting the attack angle
5 Loading the loading platform and spreader
6 Adjusting the spreading volume
7 Adjusting the spreading width
Switching winter operation on
Select the C menu in the multifunction display with the turn-push knob
Fig. 194-69 and activate winter operation in the menu item E, see
page 42. The Winter service information symbol Fig. 194-A appears in the
multifunction display.
Warning
Use winter operation only in connection with an uncoded
attachment. In winter operation the front lift system is not lim-
ited downwards. There is a risk of an accident on unintended
lowering of the attachment.
Adjusting the attack angle
Adjust the attack angle with the joystick Fig. 194-70.
•
Joystick to the left: The front attachment swivels to the left
•
Joystick to the right: The front attachment swivels to the right
Loading the loading platform
Note when loading the loading platform:
•
Load on the loading platform (bulk goods) with spreader attached
maximum 150 kg
•
Load on the loading platform (bulk goods) with spreader not attached
maximum 400 kg
•
Load on the loading platform (piece goods) with spreader attached:
maximum 100 kg
Filling height of the loading platform, see mark Fig. 195-A. Load capacity
of the tie-down eyes Fig. 195-B: maximum 100 daN. You can use the
separating board Fig. 195-C for different materials.
Loading the spreader
Different specific weights arise according to the condition of the spread
material (wet or dry). Check the specific weight of the spread material
before filling.
Payload of the spreader, see operating manual of the spreader.
Adjusting the spread volume
Adjusting the spread volume, see operating manual of the spreader.
Adjusting the spreading width
The spreading width depends on the condition of the spread material and
the speed of the spreading disk. The more coarse grained the spread
material is, the larger is the possible spreading width.
Adjusting the spreading width, see operating manual of the spreader.
06-147015-00-00.fm
Attachments and Options
Fig. 194:
C
B
Fig. 195:
Reference
Page 134
Page 134
Page 179
Page 179
Page 179
Page 179
Page 179
70
69
A
A
179