6.1.3
Mounting
Mounting the suction mouth
1. Place the vehicle on a level surface and hold it with the parking brake.
2. Position the suction mouth Fig. 117-84 by hand or with the auxiliary
tool Fig. 117-A centrally under the holding plate Fig. 117-B. If required,
fix the front tool carrier with the chain Fig. 117-H in the upper position.
Release the fixation after mounting!
3. Push the joystick Fig. 117-70 forwards. The holding plate is lowered
onto the suction mouth.
4. Shift the suction mouth centrally under the holding plate until the stops
Fig. 117-C come up to the points Fig. 117-D.
5. With the lever Fig. 117-E lock and secure the suction mouth on the
counter bearing Fig. 117-F of the holding plate, see sketch Fig. 117-G.
Dismantling is in the reverse order.
Note
If circulating water is in the dirt hopper, the circulating water
must be shut off using the ball cock!
Bring the ball cock Fig. 117-10 into position II.
D
C
Fig. 117:
06-147015-00-00.fm
B
F
H
D
84
C
E
G
Attachments and Options
A
70
10
II
I
127