HAKO Citymaster 650 Operating Manual page 60

Use
II
Fig. 48:
60
Entry.X
Access authorization is allocated using Entry.X. Entry.X can only be used
with view.X.live.
Putting into service
1. Start the vehicle with the ignition switch Fig. 48-76.
A
• Red LED of the I-Button Reader Fig. 48-82 ON.
2. Press the I-Button Key Fig. 48-A against the I-Button Reader
Fig. 48-82 for one to two seconds.
• Red LED OFF.
82
I
• Operating data recording system active.
If the vehicle is not registered with the I-Button, the following condition
arises according to the selected option:
Access authorization
76
No restriction
(50EC001)
Ending operation
Switch off the vehicle with the ignition switch.
Display LED
Red LED ON
Note
A red illuminated LED is a request for activation of the operat-
ing data recording system via the I-Button!
Function
Fully functional
02-147015-00-00.fm