HAKO Citymaster 650 Operating Manual page 181

Setting the fixed engine speed
The fixed engine speed is set with the switch Fig. 198-64. Set the speed
according to the requirements.
Stage rpm
1 – ECO 1900
2 – Standard 2250
3 – Maximum 2630
Starting snow clearing
The accelerator pedal Fig. 199-36 is used for continuously changing the
speed for driving forwards.
The accelerator pedal Fig. 199-37 is used for continuously changing the
speed for reversing.
Push the accelerator pedal down slowly until the vehicle starts, the speed
is increased further by pressing on the pedal.
Slowing down or braking the vehicle: Slowly reduce the pressure on the
accelerator pedal, the vehicle slows down or stops.
The vehicle speed in the:
•
transport mode is 0 to 25 km/h,
•
work mode 15/20/25 km/h according to selected engine speed.
Attention
Before you leave the vehicle, the attachment must be lowered
to the ground!
06-147015-00-00.fm
Use
At low load
For medium load
For high load
Attachments and Options
Fig. 198:
37
Fig. 199:
64
36
181