HAKO Citymaster 650 Operating Manual page 140

Attachments and Options
A
B
Fig. 141:
A
B
Fig. 142:
140
Comfort package for the dirt hopper (optional)
The comfort package contains the extended collision protection
Fig. 141-A and the step Fig. 141-B.
Convenient inspection of the dirt hopper is possible with the folding step
and the handles on the dirt hopper.
High-pressure cleaner (optional)
The high-pressure cleaner Fig. 142-99 is equipped with a 10 metre long
pressure hose. Check the following before starting up:
C D
•
Fill the fresh water tank, see page 133.
•
Check the water filter Fig. 142-D of the high-pressure cleaner and
clean it if necessary.
99
1. Start the vehicle and drive to the work site. Engage the parking brake.
Open the flap Fig. 142-E.
2. Set the changeover valve Fig. 142-B to position II.
• Position I: Suction fan hydraulics
• Position II: High-pressure cleaner hydraulics
3. Switch the engine and suction fan on.
4. Set the pressure controller Fig. 142-C to the required working pressure.
5. Take up the lance Fig. 142-A with the pressure hose and clean the
surface.
Do not use steam cleaners and high-pressure cleaners for cleaning
electrical/electronic components and the engine compartment!
6. After cleaning, stow the lance and the pressure hose back in the rear
wagon and set the changeover valve back.
E
06-147015-00-00.fm