HAKO Citymaster 650 Operating Manual page 85

Starting the engine
Note
Before starting the engine, depress the brake pedal!
Start the engine with the ignition switch Fig. 85-76.
•
Position 1: Preheat the engine until the control light Fig. 85-A goes out.
•
Position 2: Start the engine.
• The ignition switch goes back into position 1.
Note the information on the ignition switch on page 64.
Releasing the parking brake
Press the brake pedal Fig. 84-46 without operating the parking brake
Fig. 84-45.
Starting transport mode
Slowly press down the accelerator pedal Fig. 86-36 or Fig. 86-37 for the
required direction and speed. The vehicle moves away. Engine speed in
transport mode = 1100 to 2630 rpm. The corresponding engine speed and
the transport mode information symbol Fig. 86-A appear in the multifunc-
tion display.
The speed in the transport mode is 0 to 25 km/h.
When the accelerator pedal is released (forwards or reveres) the vehicle
comes to a stop quickly because of the hydrostatic braking effect.
03-147015-00-00.fm
Operation
Fig. 85:
37
36
Fig. 86:
A
76
A
85