HAKO Citymaster 650 Operating Manual page 132

Attachments and Options
E
Fig. 122:
132
Continued – Mounting the dirt hopper
9. Align the dirt hopper to the rear wagon. Procedure:
• Position the dirt hopper over the rear wagon and check the gap size
Fig. 122-X with 5-10 mm. If necessary, correct with the screw
Fig. 122-A.
• Push the rollers of the dirt hopper up into the pockets Fig. 122-B.
• The fixed bearings Fig. 122-C of the dirt hopper and the holders
Fig. 122-D of the rear wagon must be in alignment.
10.Unlock the lever Fig. 122-E of the trolley Fig. 122-97 and swing it into
the upper position. Let the dirt hopper down slowly! Withdraw the trolley
and close the lid.
11.Secure the dirt hopper with bolts and splints.
12.Make the connections.
• Lift system hydraulic cylinder – supply/return = Fig. 122-F
• Suction fan hydraulic motor – supply/return = Fig. 122-G
• Circulating water = Fig. 122-H
Dismantling is in the reverse order.
G
F
85
C
D
97
H
B
X
A
26 mm
06-147015-00-00.fm