HAKO Citymaster 650 Operating Manual page 131

Continued – Mounting the dirt hopper
Danger
Risk of injury due to tilting over! Make sure that the cross strut
Fig. 121-G has been inserted when transporting the dirt hop-
per on the supports Fig. 121-101. Secure the supports with
bolts and splints.
6. Push the trolley with the positioning aid Fig. 121-B against the fixed
bearings Fig. 121-D of the dirt hopper. The screw Fig. 121-C must be
adjusted to 26 mm!
7. Carefully lower the lever Fig. 121-A of the trolley and make sure that
the upper locking pins Fig. 121-E sit in the holders of the dirt hopper
Fig. 121-F. Lock the lever Fig. 121-A.
8. Remove the supports Fig. 121-101. To do this, pull out the split pins
and the bolts.
Note
Protect the seal of the suction nozzle Fig. 121-H with a cover
plate.
B
26 mm
A
97
Fig. 121:
06-147015-00-00.fm
C
D
E
Attachments and Options
E
G
F
85
H
101
131