Attachments and Options
6.4.3
Mounting
92
Fig. 189:
174
Mounting the snow blade
1. Place the vehicle on a level surface and hold it with the parking brake.
Switch the engine off and pull out the ignition key.
2. Unlock the locking hook Fig. 189-A and locking rod Fig. 189-B on the
front tool carrier Fig. 189-12.
3. Align the snow blade Fig. 189-92 centrally and in alignment with the
front tool carrier.
4. Raise the snow blade with the joystick Fig. 189-70 up into the end
position.
5. Lock the snow blade with the locking hook and locking rod.
6. Close the valve Fig. 189-C for the suction mouth lift system.
7. Make the connections.
• Swivel snow blade – supply = Fig. 189-D
• Swivel snow blade – return = Fig. 189-E
• Coding plug X 63 = Fig. 189-F
Dismantling is in the reverse order.
D
F
70
E
A
B
12
C
06-147015-00-00.fm