HAKO Citymaster 650 Operating Manual page 134

Attachments and Options
II
I
10
Fig. 125:
A
Fig. 126:
B
C
Fig. 127:
A
83
Fig. 128:
134
Checking the ball cock circulating water
The circulating water is closed off only with the ball cock Fig. 125-10 for
maintenance purposes. In normal operation the ball cock must be opened!
•
Circulating water supply opened: Ball cock in position Fig. 125-I
•
Circulating water supply closed: Ball cock in position Fig. 125-II
Note
Close off the circulating water supply only if there is circulating
water in the dirt hopper and the suction mouth should be
mounted or dismounted.
Checking the suction mouth lift system
II
Open or close the valve Fig. 126-A of the suction mouth according to the
attachment.
•
Valve opened (position I) for:
• Vacuum sweeping system (sweeping unit)
•
Valve closed (position II) for:
• Sweeping system (front sweeping machine)
• Lawn mowing system (mower)
I
• Snow clearing system (snow blade etc.)
• Transport system
Checking the front tool carrier
The adjustment range of the front tool carrier is limited downwards with
the chain Fig. 127-A. To do this, raise the front tool carrier with the
joystick Fig. 130-70 and hook the chain in the holder Fig. 127-B.
•
For vacuum sweeping, hook the chain in the holder with the first link.
•
For transportation, fix the front tool carrier with the chain in the topmost
position.
A
If the chain is not required, hook it into the hook Fig. 127-C (parking
position)!
Checking the transport protection device
The transport protection device Fig. 128-A is located on both sides of the
sweeping unit Fig. 128-83 and has the task of protecting the rotating
brushes during transport.
•
Locking: Raise the brush arm using the handle Fig. 128-B. Lock the
brush arm with the hook of the transport protection device.
•
Unlocking: Raise the brush arm using the handle Fig. 128-B. Unlock
the brush arm with the hook of the transport protection device and
carefully let the brush arm down.
B
06-147015-00-00.fm