Motorola MVME147 Installation And Use Manual page 80

Programming
Software Interrupt 1 Control Register
ADDRESS
FFFE102C
4
Note
Bits 0-2
Bit 3
Bit 7
4-30
BIT 7 BIT 6 BIT 5
IntStat
R
All bits are cleared by reset.
These bits program the interrupt level that is generated. Level 0
does not generate an interrupt.
When this bit is high, the interrupt is enabled. The interrupt is
disabled when this bit is low.
This bit is low when the interrupt is disabled and it is high
when the interrupt is enabled.
BIT 4 BIT 3 BIT 2
Enable IL2
R/W R/W
BIT 1 BIT 0
IL1 IL0
R/W R/W