Motorola MVME147 Installation And Use Manual page 184

Debugger General Information
B
Port Numbers
B-30
OF R0
147Bug>
R0 =00000000 00000000?
MD 0+R0;DI
147Bug>
00000+R0 48E78080
00004+R0 4280
00006+R0 1018
00008+R0 5340
0000A+R0 12D8
0000C+R0 51C8FFFC
00010+R0 4CDF0101
00014+R0 4E75
147Bug>
For additional information about the offset registers, refer to the
MVME147BUG 147Bug Debugging Package User's Manual.
Some 147Bug commands give you the option of choosing the port
which is to be used to input or output. The valid port numbers
which may be used for these commands are:
0 - MVME147 EIA-232-D (MVME712/MVME712M serial port 1)
1 - MVME147 EIA-232-D (MVME712/MVME712M serial port 2)
2 - MVME147 EIA-232-D (MVME712/MVME712M serial port 3)
3 - MVME147 EIA-232-D (MVME712/MVME712M serial port 4)
4 - MVME147 Printer Port (MVME712/MVME712M printer)
These logical port numbers (0, 1, 2, 3, and 4) are
Note
referred to as ÒSerial Port 1", ÒSerial Port 2", ÒSerial Port
3", ÒSerial Port 4", and ÒPrinter PortÓ, respectively, by
the MVME147 hardware documentation and by the
MVME712/MVME712M hardware documentation.
For example, the command DU1 (Dump S-records to
Port 1) would actually output data to the device
connected to the serial port labeled
the MVME712/MVME712M panel.
1327C.
MOVEM.L
CLR.L
MOVE.B
SUBQ.W
MOVE.B
DBF
MOVEM.L
RTS
SERIAL PORT 2
D0/A0,—(A7)
D0
(A0)+,D0
#1,D0
(A0)+,(A1)+
D0,$A+R0
(A7)+,D0/A0
on