Motorola MVME147 Installation And Use Manual page 15

Equipment Required
The following equipment is required to make a complete system
using the MVME147:
(collectively referred to in this manual as MVME712 unless
separately specified).
Note
The MVME147Bug debug monitor firmware (147Bug) is provided
in the two EPROMs in sockets on the MVME147. It provides:
147Bug includes a user interface which accepts commands from the
system console terminal. 147Bug can also operate in a System
Mode, which includes choices from a service menu. Refer to
Appendix B, Debugger General Information.
Terminal
Disk drives and controllers
Transition module(s) and connecting cables:
Ð MVME712-12
Ð MVME712-13
Ð MVME712A
Ð MVME712AM
Ð MVME712B
Ð MVME712M
The MVME712B is designed to be used only in
conjunction with an MVME712-12/-13/A/AM for
external SCSI and/or Ethernet connections.
Over 50 debug, up/downline load, and disk bootstrap load
commands
Full set of onboard diagnostics
One-line assembler/disassembler
Equipment Required
1-7
1