Removing Punched Scrap From The Puncher Unit (Option) - Sharp AR-FN8 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
H. Removing Punched Scrap
from the Puncher Unit
(option)
If the display indicates a punched scrap full
state on the puncher unit, perform the follow-
ing to remove the punched scrap:
1) Open the front door of the puncher unit.
Figure 1-352
2) Slide out the punched scrap container.
Figure 1-353
3) Discard the punched scrap.
Figure 1-354
1-26
4) Return the punched scrap container to its
original position.
Figure 1-355
5) Close the front door of the puncher unit.
Figure 1-356