Reliability; Conforming Standards - Sharp AR-FN8 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
5.

Reliability

Stack alignment
[Stack section]
(1) Excluding ST-R, A5-R, B5-R
(2) Bundle identification must be valid in the job offset mode.
(3) Side shift quantity is the value at the back edge of paper.
(4) Excluding unexpected error of non-conformity of the standards
(5) Alignment of 750 sheets or more is out of the above specifications.(Loadable)
(6) Alignment of mixed sizes is out of the above specifications. (Loadable)
6.

Conforming standards

Safety standards
Obstruction wave standards
1-8
Side shift
Lead edge shift
Non-sort, sort, group
L1: 30mm or less
A
Non-sort, sort, group
L2: 50mm or less
Non-sort, sort, group
B
(1) UL
(2) C-UL
(3) TUV
(4) CE (Applied by Sharp)
(19 VCCI (As a system)
(2) FCC (IC) (As a system)
L1=A - Paper width
L2=B - Paper length